Joining dado rails that aren't both horizontal


Postby maldrapool » Sat Jul 14, 2007 7:19 pm

Can anyone tell me how to join two dado rails - one at an angle coming down the staircase joining to another horizontal in the hall. Because of the angle of the staircase dado, the edge is longer than the horizontal edge so they do not join. Thx
maldrapool
Posts: 2
Joined: Sat Jul 14, 2007 5:04 pm

Sponsor

Simply Build It

Postby wack » Sat Jul 14, 2007 10:50 pm

Hi, Draw a horizontal line on the hall wall and a angle line on the staircase wall at the height the dado is to be fitted. Place a piece of dado on the horizontal line and draw a line on the other edge and do the same on the angle line. Where the horizontal and angle lines meet this will give you the angle of the cuts you need.
wack
Posts: 21
Joined: Thu May 31, 2007 9:37 pm


Postby maldrapool » Tue Jul 17, 2007 7:36 pm

Thanks Wack. I'll give it a go this weekend
maldrapool
Posts: 2
Joined: Sat Jul 14, 2007 5:04 pm


Display posts from previous
Sort by
Order by


 


  • Related Topics