Kitchen Unit Wall Fixing Heights for Drylining Battens


Postby Cymrodor » Wed Jul 08, 2015 7:47 pm

I'm battening out a wall to dry line it before installing a kitchen. I've not bought the kitchen yet but would like to know at what heights I should put the horizontal battens to take the screws holding wall units to the wall. It wouldn't happen to be the same for both standard and tall wall unit heights?
Cymrodor
Rank: Labourer
Progress to next rank:
50%
Posts: 3
Joined: Tue Sep 23, 2014 6:06 pm

Sponsor

Gorilla Glue heavy duty grab adhesive

Postby Mad110 » Wed Jul 22, 2015 7:54 pm

Standard worktop height is 900mm, so about 850mm above finished floor level should be ok. As for wall units, if you leave the usual 450mm for tiling and your wall units are 720mm high, then mark approx 75mm below the top line for the centre of a batten.(hope that makes sense!)
This should be ok for most kitchen suppliers, magnet, Howdens etc, but not ikea (totally unique system)
Mad110
Rank: Apprentice
Progress to next rank:
73.7%
Posts: 19
Joined: Wed Nov 26, 2014 9:20 pm

Display posts from previous
Sort by
Order by



  • DIY How to Project Guides

  • DIY how to tutorial projects and guides - Did you know we have a DIY Projects section? Well, if no, then we certainly do! Within this area of our site have literally hundreds of how-to guides and tutorials that cover a huge range of home improvement tasks. Each page also comes with pictures and a video to make completing those jobs even easier!



 


  • Related Topics