Painting inside fireplace before fitting a woodburner

by **Bramble** » Thu Sep 03, 2009 10:25 am

I am about to fit a new woodburner and have repaired and cleaned the soot off and sealed with PVA . The rear of the fireplace is still blackish so can i paint this with normal masonry paint, there will be a 6" gap from the woodburner.

by **bd3cc** » Mon Sep 07, 2009 9:47 pm

You may need 2-3 coats of PVA to completely seal the soot, otherwise it will come through.
If you have done this it should be fine with masonary paint.

by **Bramble** » Mon Sep 14, 2009 10:55 am

Thanks for the advice, this is in fact what i did, so fingers crossed it will be ok.