redidrive plasterboard fixings problem


Postby Hydrogenspectrum » Mon May 28, 2007 6:12 pm

I was trying to put a mirror up onto a plasterboard wall, but the holes I needed were very close together. I used the redidrive fixings but because they are wide they wouldn't go next to each other, fell out and left a big hole in the wall. How do I fix the hole and how do I fix my mirror up?
Hydrogenspectrum
Posts: 1
Joined: Mon May 28, 2007 5:40 pm

Sponsor

Simply Build It

Postby thedoctor » Thu May 31, 2007 6:57 am

See our project on filling holes in plasterboard. To fix the mirror after this you need to glue (See our adhesives used at home project) a piece of timber to the wall using gripfil, and screw the mirror fixings to that after letting it set foir a day. The timber only needs to be 10mm thick and obviously slightly wider than the distance between the holes.
thedoctor
Site Admin
Posts: 2173
Joined: Sat Apr 08, 2006 12:15 pm


Display posts from previous
Sort by
Order by


 


  • Related Topics