Repairing Damp Plaster - What to Fill Patches With?


Postby Ronan82 » Fri Feb 07, 2014 6:47 pm

Dear all,

I've recently removed the lining paper in my living room due to damp patches forming caused by the adjacent building.
I've sorted the source of the damp but I have found that there are some large areas of damaged plaster.
The plaster is very old horse hair plaster and I intend to chip off the damaged plaster back to the lath and then re patch the damaged areas.
My question is....what should I fill the damaged areas with?
ShouldI I use a plaster repair formula e.g. Pollyfilla plaster repair or should I just go right in and should I use a multi finish plaster mix.
I'm not overly confident with plaster so any advice would be more than welcome.

Many thanks!
Ronan82
Posts: 2
Joined: Fri Feb 07, 2014 6:30 pm

Sponsor

Simply Build It

Postby welsh brickie » Fri Feb 07, 2014 10:19 pm

use carlite bonding, it will set in about 2 to 3 hours, once set you need to scrape it back 3mm from the finished surface to allow the finishing plaster, use thistle multi finish plaster for the final coat
welsh brickie
Posts: 2007
Joined: Sat Apr 12, 2008 7:54 am


Postby Ronan82 » Fri Feb 07, 2014 10:35 pm

Thank you very much!
Ronan82
Posts: 2
Joined: Fri Feb 07, 2014 6:30 pm


Display posts from previous
Sort by
Order by


 


  • Related Topics