toilet doesnt fill then over flows


Postby seagal » Thu May 10, 2007 3:11 pm

hello i have a sanitop with a split push button cystern. when i try to flush the cystern is empty i have to slide the plastic loat down but then it over flows i have to keep moving it up and down until it stops i am concerned it will break as it is only plastic please help thanks all xxx
seagal
Posts: 2
Joined: Thu May 10, 2007 3:06 pm

Sponsor

Simply Build It

Postby thedoctor2 » Thu May 10, 2007 6:08 pm

Hi
Think the easest answer to that is replace it , they only cost pennys and saves a lot of bother to from the wife
thedoctor2
Posts: 52
Joined: Wed May 02, 2007 6:37 am


Postby seagal » Thu May 10, 2007 6:12 pm

thnks for your reply any idea if it is different from normal toilet floats and is it difficult to get as it its a sanitop toilet? thanks x
seagal
Posts: 2
Joined: Thu May 10, 2007 3:06 pm


Postby Arnak » Sat May 12, 2007 11:00 am

Hi,

Yes the float in those type of cisterns is different to the standard type.

Are you sure that the float is the problem as the float operates a valve?

It sounds more like the valve is faulty.

I'd suggest either getting a plumber to have a look or contact saniflow for a repair kit.

A lot of the big manufactures have web sites with fitting diagrams and a spare parts list so you may be able to order direct or they will have a list of suppliers.

Arnak
Arnak
Posts: 37
Joined: Fri May 11, 2007 9:55 pm


Display posts from previous
Sort by
Order by


 


  • Related Topics