Main navigation


baxi brazilia fault
Information, help and advice on many gas related subjects from gas fires to domestic appliances

   Post Reply
4 posts   •   Page 1 of 1
socagraddy
Labourer
Labourer
Posts: 1
Joined: Mon Feb 25, 2008 7:46 pm

baxi brazilia fault

by socagraddy » Mon Feb 25, 2008 7:59 pm

my baxi brazilia cuts out after 3 mins it has a very poor yellow flame,the t/couple is good and the flue is in good condition it appears to be short of air has anyone any idea,s the unit is in otherwise good shape
Last edited by socagraddy on Wed Mar 05, 2008 8:27 pm, edited 1 time in total.
Regan
Apprentice
Apprentice
Posts: 5
Joined: Mon Mar 03, 2008 7:44 pm

by Regan » Mon Mar 03, 2008 8:06 pm

is there any debris or any other obstruction that might interfere between the thermocouple and flame?
Regan
Apprentice
Apprentice
Posts: 5
Joined: Mon Mar 03, 2008 7:44 pm

by Regan » Mon Mar 03, 2008 8:08 pm

is there any debris or any other obstruction that might interfere between the thermocouple and flame? similarly between burner jet and burner
htg engineer
Project Manager
Project Manager
Posts: 3256
Joined: Tue May 22, 2007 6:22 pm

by htg engineer » Thu Mar 06, 2008 8:10 pm

Have the burner, injectors, pilot and filter been cleaned ?
in other words when was your last annual gas service carried out ?

Have the boiler serviced by a CORGI registered installer, if there's any faults they will be found, repaired or they will advise on the best action to be taken, from ordering parts to replacing boiler.
   Post Reply
4 posts   •   Page 1 of 1
It is currently Sun Apr 14, 2024 3:10 pm
Return to “Gas and Gas Fitting Forum”