Main navigation


Fitting Honeywell DT90E in Place of old Dial Thermostat
Help and information on all topics relating to your central heating, air conditioning and ventilation issues.

   Post Reply
2 posts   •   Page 1 of 1
M_arnold218
Labourer
Labourer
Posts: 2
Joined: Tue Oct 29, 2019 8:55 pm

Fitting Honeywell DT90E in Place of old Dial Thermostat

by M_arnold218 » Wed Oct 30, 2019 5:32 pm

I have a dial thermostat with the following 3 wires (according to the connections in it): N, L also looped through to COM, ON (and no wire in OFF).

I'm not sure how these should connect to the DT90E A,B,C connections.

Help appreciated.
ericmark
Project Manager
Project Manager
Posts: 2851
Joined: Fri Oct 02, 2009 9:49 pm
Location: Llanfair Caereinion, Mid Wales.
  Contact ericmark

Re: Fitting Honeywell DT90E in Place of old Dial Thermostat

by ericmark » Thu Oct 31, 2019 1:56 pm

http://www.free-instruction-manuals.com ... 457920.pdf

It seems A = Com
B = NO
C = NC
So you only use A and B so make the neutral safe, and other two go to A and B and really does not matter if wrong way around.
   Post Reply
2 posts   •   Page 1 of 1
It is currently Fri Apr 05, 2024 2:15 pm
Return to “Central Heating and Air conditioning and Ventilation Forum”